Singahobby Propeller Shaft Adapter for Multicopter is specially designed for multicopter motors that require to fit large size propeller. It is made of 7075 aluminum alloy weighing at just 13g! It is designed to fit 6mm propeller holes and motors with 3.17mm (with copper bushing) or 4mm shafts.
Singahobby Propeller Shaft Adapter for Multicopter
Price: SGD$12.62add to cart | Inquire now
The Feiyu-Tech FY-40A Flight Stabilization System is designed to be lightweight and made cost-effective for beginners to master and enjoy RC modelling. It has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space.
Feiyu-Tech FY-40A Flight Stabilization System
Hobby Lord Optimus Flight Controller is an autopilot system designed for RC hobbyists using on multi-rotor aircrafts for aerial photography, FPV flying , etc. This autopilot system has both attitude and manual stabilization modes. It has a built-in Inertial Measurement Unit (IMU) with 3-axis accelerometer and 3-axis gyro.
Hobby Lord Optimus Flight Controller (Economical Version)
Price: SGD$90.00add to cart | Inquire now
This is a replacement battery for Parrot AR.Drone 2.0. It has a higher capacity of 2000mAh.
AR Drone 2.0 LiPo Battery 2000mAh
This Futaba Aluminum Horn 38GM is designed for airplane servos that require high rigidity. Horn measures 50 x 15 mm.
Futaba Aluminum Horn 38GM
Price: SGD$18.00add to cart | Inquire now
Futaba SBS-01G GPS Sensor displays longitude, latitude, altitude, distance (surface and slant), speed and rate of climb/descent. It features built-in atmospheric pressure sensor.
This sensor is designed for use in conjuction with Futaba's telemetry enabled transmitters.
Futaba SBS-01G GPS Sensor
The World Models Clipped Wing Cub 48 is a 1.6m wingspan, balsa/plywood constructed model that comes with built-up wings. It can be powered by a 2-stroke 0.40 or 4-stroke 0.52 engine. Also available in two other colour schemes blue/white sunburst and yellow/black sunburst.
World Models Clipped Wing Cub 48 (Red)
Price: SGD$176.60add to cart | Inquire now
This Singahobby 3mm AWG10 Silicon Wire is ideal for high current applications in RC. Measures 1m in length.
Singahobby 3mm AWG10 Silicon Wire (1m)
Price: SGD$10.40add to cart | Inquire now
You can now fly your model as if you are the pilot on your very own RC model! The Singahobby 2.4GHz Camera System is designed to integrate perfectly with your FPV piloting system. This 2.4GHz camera system includes a wireless USB DVR with an easy software installation (wireless USB DVR) on a PC/laptop. It can also connects directly to a TV without any hassle.
Singahobby 2.4GHz Camera System with Transmitter & Receiver
The JR RA01TL is a DMSS Full Range Telemetry/Coaxial Antenna Module designed for use with JR 2.4GHz receivers. Telemetry modules from JR for the DMSS systems have a dual purpose and are available for various applications offering bi-directional communication of telemetry information, plus increased signal path diversity when placed apart from the standard dual coaxial antenna equipped on the main receiver unit.
JR RA01TL DMSS Remote Antenna for 2.4GHz Receiver
JR RG1131BPU is a DMSS Full Range Battery Safe telemetry receiver designed with support for dual batteries and high current loads.
JR 03428 RG1131BPU DMSS Full Range Battery Safe Receiver
This Boscam D58-4 5.8GHz Diversity Receiver is the ultimate 5.8Ghz wireless audio video solution for FPV applications!
Boscam D58-4 5.8GHz Diversity Receiver
This Singahobby GoPro 3 Camera Cable USB to AV & Input not only allows you to have an AV output from the Hero 3 camera but also a 5V DC input to power the camera without the need for an internal battery, effectively reducing weight on the model. This cable is ideal for RC applications such as FPV flying.
Singahobby GoPro 3 Camera Cable USB to AV & Input
Precision Aerobatics is proud to present the second release in the NEXT Generation PA planes. It started with the Bandit, and now comes the Katana MX. The NEXT Generation PA planes allow you to do a lot more than you would expect.
Precision Aerobatics Katana MX Airframe Only (Red)
The Boscam HD Thumbcam is the latest high definition compact camera that records video images up to 1080p at 30fps! This Thumbcam fits easily onto any RC model with its petite dimensions of 72 x 27.3 x 20mm and it weighs just 39g!
Boscam HD Thumbcam
Price: SGD$176.70add to cart | Inquire now
Get the Edge over your competition.
With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The Castle Creations Phoenix Edge 100 ESC is designed for Helicopters 500 Class, 550 Class, or 600 Class (use external BEC or RX/servo power source; not included) and Fixed Wing .40 - .90 class.
Castle Creations Phoenix Edge 100 ESC
Price: SGD$162.00add to cart | Inquire now
The high performance OS Speed 21XZ-B Spec II Engine now comes in a black anodized crankcase. It features DLC coated crankshaft with silicone filled intake passage for improved fuel flow. Its has a newly designed slide valve carburetor with three carb reducers that restrict airflow helping to increase the amount of torque produced.
OS Speed 21XZ-B Spec II Engine
Price: SGD$462.62add to cart | Inquire now
The OS T-1070SC L52 silencer is tuned to match the OS 12XZ Speed Spec III engine. Package includes tuned pipe with header.
OS T-1070SC L52 Pipe Complete Set
These Falten Power Wooden Propellers are designed for use with multi-rotor flyers for high performance. They are paired to be of the exact same weight and pre-balanced during production. Their surfaces are finished matt for weight reduction. Package includes a clockwise and counter-clockwise rotating propeller each.
Falten Power 14x4.7 Wooden CW/CCW Propellers (Pair)
Price: SGD$38.50add to cart | Inquire now
The Super Mini TopSky is a 1m wingspan DLG designed for RC enthusiasts who desire a quality built and ultra-lightweight soaring model.
Super Mini TopSky - Blue
Go live FPV flying with the FlyCamOne HD V-Eyes! See and hear the world from a bird’s eye view like never before. You can now do pan/tilt controls with built-in gyroscope in the V-Eyes goggles while flying real-time in the air!
FlyCamOne HD V-Eyes
Haiyin Lithium Polymer Batteries publish only “True Specs”, including real and stated capacity, discharge “C” rates. The battery packs use “matched cells” and they undergo extensive testing, charging and discharging cycles prior to leaving the factory.
Haiyin 3-Cell 2200mAh 40C Lipo
The Kontronik Bluetooth Module enables your Apple smart phone or tablet to communicate with Kontronik Kosmik ESCs. The downloadable KONTRONIK Communicator App from Apple App Store will allow you to wirelessly program your KOSMIK via your phone or tablet. In addition to programming, the Communicator App can let you view live stream data from your KOSMIK as long as you remain in bluetooth range.
Kontronik Bluetooth Module
Back in Stock!
UHU Hart is a crystal-clear, fast drying adhesive for assembling small parts in model building, for handicraft work and for household tasks. Particularly suitable for balsa wood and other wooden materials. UHU hart is also suitable for stiffening and sealing the surface of materials. Dries hard.
UHU Hart Glue - Balsa wood & Wooden Material
Price: SGD$6.30add to cart | Inquire now
Singahobby Kevlar Thread is suitable for building models (especially DLGs) where lightweight and good strength in bonding of joints is required. Modelers use it to join carbon fibre rods, lash metal wires to balsa structures, etc with great results.
Singahobby Kevlar Thread
Price: SGD$5.00add to cart | Inquire now
The Boeing Chinook is a tandem rotor helicopter operated by the Royal Air Force (RAF). A series of variants based on the United States Army's Boeing CH-47 Chinook, the RAF Chinook fleet is the largest outside the United States. Hirobo has modified the 50 size Chinook with a new main frame design, larger tank, additional body style and updated heads and swashplates. Controls are now electronically mixed via Hirobo designed control system included with the kit.
Hirobo 0406-906 50 Scale HC-1 Chinook Royal Air Force
Hirobo 0414-932 AH-1 SIII Tow Cobra is a 90 scale size of the armed helicopter of the U.S. Army, This camouflage painted assembly kit is reproduced with excellent precise scale details with tow missile launcher, cockpit, engine exhaust and more. The Bell AH-1 Cobra is a two-bladed, single engine attack helicopter manufactured by Bell Helicopter.
Hirobo 0414-932 90 Scale AH-1 SIII Tow Cobra Camouflage
Price: SGD$3,579.60add to cart | Inquire now
Hirobo 0403-959 Long Ranger Purple is a 50 size scale body designed to fit Hirobo SDX HPM/SWM, Sceadu Evolution HPM/SWM/50 and Sceadu HPM/SWM/50 helicopters. The fuselage is FRP urethane painted body for a durable and great looking finish.
Hirobo 0403-959 50 Scale Long Ranger Purple
Price: SGD$812.00add to cart | Inquire now
The Gaui NX4 is a torque tube driven extreme 3D flybarless helicopter that is made with full carbon fiber frame and CNC aluminum rotor head. Its newly designed CCPM control system is capable of good precision for enhanced hovering and 3D flight control. This is a kit version.
Gaui 313002 NX4 Flybarless Helicopter (Kit)
Price: SGD$502.10add to cart | Inquire now
Hirobo 0414-941 Eagle WC3 is a 90 class helicopter for F3C World Championships. It is flown by Hirobo's top pilot, Manabu Hashimo at the 2008 F3C Asia Oceanic Continental Championship (AOCC). It features Hirobo's SSZ-5 rotor head, a highly rigid carbon fiber precisely fabricated upper and lower split frame, EX carbon canopy and D3 high torque auto rotation clutch for maximum performance.
Hirobo 0414-941 Eagle WC3 AOCC
Price: SGD$3,780.00add to cart | Inquire now