Revolectrix Cellpro PowerLab 8 Charger V2 | Revolectrix Cellpro PowerLab 8 Charger is capable of charging, discharging, monitoring, or performing multiple cycles on any current or future battery chemistry at alarming speed, Cellpro PowerLab 8 (V2) represents the end of all speculation about who sells the most powerful battery management system in its class for the best value.
|
Revolectrix Cellpro PowerLab 8 Charger V2 Price: S$287.50 add to cart | Inquire now |
Revolectrix Stackable 40A Safety Banana Plug Cable (Cellpro/PowerLab) | This cable has a pair of red/black stackable 40A safety banana plugs to bare wire. Made using high-strand 12AWG silicon wire. Includes 40A standard automotive blade fuse in both the positive and negative wire.
|
Revolectrix Stackable 40A Safety Banana Plug Cable (Cellpro/PowerLab) Price: S$13.75 add to cart | Inquire now |
Revolectrix KO/GP Standard Adapter for Powerlab 8 Charger | This adapter supports one battery pack at a time and may be used to support either node-only or node-plus-discharge (high current) charging applications. Interconnects any 2s to 6s Great Planes or Kokam battery pack to the Cellpro PowerLab. This adapter also supports a number of other manufacturer's node connectors.
|
Revolectrix KO/GP Standard Adapter for Powerlab 8 Charger Price: S$11.70 add to cart | Inquire now |
Revolectrix 3S Lipo Battery 3700mAh 60C (Diamond) | This Diamond Label Revolectrix 3S 3700mAh Lipo Battery includes GP/KO (JST XH) compatibile balance connector and red/blk silicon jacket, bare wire leads. Solder on your discharge connector of choice. Size: 22mm thick x 44mm W x 130mm L, Weight: 280 grams, Ratings: 60C. Cont. 120C Burst. 6C Charge Rate.
|
Revolectrix 3S Lipo Battery 3700mAh 60C (Diamond) Price: S$98.00 add to cart | Inquire now |
Revolectrix MPA to Powerlab 6/8 Interconnect Cable | This special cable is required to interface the Revolectrix MPA to either the Cellpro PowerLab 6 or PowerLab 8 Battery Workstations. The cable is 12 inches long, and includes a JST XH on one end and a JST PA (Cellpro) connector on the other end.
|
Revolectrix MPA to Powerlab 6/8 Interconnect Cable Price: S$4.95 add to cart | Inquire now |
Revolectrix PowerLab 6 Multi-Chemistry Charger | Built on the same framework as the original Cellpro PowerLab 8, this latest Revolectrix PowerLab 6 Battery Workstation provides a virtually identical feature-set as the original. Capable of charging, discharging, monitoring, or performing multiple cycles on any current or future battery chemistry at alarming speed, PL6 is optimized to balance the need for high power, high current operations against the need for small size and affordability.
|
Revolectrix PowerLab 6 Multi-Chemistry Charger Price: S$206.25 add to cart | Inquire now |
Revolectrix Cellpro 10XP Charger | | Built on the original Cellpro 10s charger technology and feature set, the ALL NEW Revolectrix Cellpro 10XP is designed to provide a whopping 15A max current output, and 600W of power (rated @30V DC input when charging a 10s Li battery) - all without increasing the size from the original product, and available at an extremely competitive price. At right around $.25 per watt, you will be hard-pressed to find a safer, faster, more-complete solution to meet your charging needs in the 600W class.
|
Revolectrix Cellpro 10XP Charger Price: S$184.50 add to cart | Inquire now |
Revolectrix MPA Adapter (JST/XH) | Revolectrix MPA is a Multi-Port Safe Parallel Module for safely interconnecting same-cell-count LiPo batteries in parallel; also supports RX/TX NiCds. This version supports LiPo batteries with JST XH compatible balance connectors and wiring. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, and other charger brands compatible with JST XH balance connectors and wiring. Be sure to purchase the proper cable to plug the MPA into your Charger or Battery Workstation.
|
Revolectrix MPA Adapter (JST/XH) Price: S$77.50 add to cart | Inquire now |
Revolectrix PowerLab 8 Charger Bag  | Revolectrix PowerLab 8 Charger Bag is a water-proof and tough carry case for your PowerLab 6 and 8 chargers along with extra compartments for connectors and batteries. Measures H16cm x W24cm x L26cm.
|
Revolectrix PowerLab 8 Charger Bag Price: S$17.10 |
Revolectrix Cellpro 4S Lithium Battery Charger  | FMA Direct Cellpro Revolution 4S Advance Lithium Battery Charger with Cell Balancing Technology.
|
Revolectrix Cellpro 4S Lithium Battery Charger Price: S$57.00 |
Revolectrix Cellpro 10S Lipo Charger 
 | The Cellpro 10S Lipo Charger is the safest and most advanced charger in the world. It may be used to charge any brand of Lithium pack using either the Cellpro adapter or pigtails.
|
Revolectrix Cellpro 10S Lipo Charger Price: S$148.20 |
FMA Direct CPD4 Co-Pilot  | FMA Direct CPD4 Co-Pilot™ “looks” at the horizon with infrared heat sensors (this same technology is used in thermal imaging cameras). The Earth is warm (even when covered with snow) below the horizon, while the sky is cold above the horizon. Co-Pilot™ “sees” this temperature difference. When Co-Pilot™ senses changes in aircraft attitude relative to the infrared horizon, it sends corrective signals to keep the aircraft level.
|
FMA Direct CPD4 Co-Pilot Price: S$62.70 |
Revolectrix Cellpro 4S Snap-On Plastic Case Upgrade | | The Revolectrix Cellpro 4S Snap-On Plastic Case Upgrade is a black, ABS plastic, replacement case for Cellpro Multi4 or upgrade for original Cellpro 4s Chargers.
|
Revolectrix Cellpro 4S Snap-On Plastic Case Upgrade Price: S$9.30 add to cart | Inquire now |
Revolectrix FUIM3 USB Interface Module for 2-way Data Communication (Cellpro 4S & 10S) | | This high speed, opto-isolated, PC USB interface module is designed to provide safe, 2-way communication between Revolectrix products and a PC USB port. Designed for use with Revolectrix Cellpro 4S and 10S chargers.
|
Revolectrix FUIM3 USB Interface Module for 2-way Data Communication (Cellpro 4S & 10S) Price: S$17.10 |
Revolectrix TP/PQ Safe Adapter For PowerLab 8 | | Revolectrix TP/PQ Safe Adapter For PowerLab 8
|
Revolectrix TP/PQ Safe Adapter For PowerLab 8 Price: S$16.00 add to cart | Inquire now |
Revolectrix GP/KO Board For Cellpro PowerLab 8 | | Revolectrix GP/KO Board For Cellpro PowerLab 8
|
Revolectrix GP/KO Board For Cellpro PowerLab 8 Price: S$16.00 add to cart | Inquire now |
Revolectrix Co-Pilot II (without IRnet Programmer Unit) | The Revolectrix Co-Pilot II is an Infrared Thermo-Technology Flight Stabilizer (pitch and roll) designed for use with almost any R/C aircraft.
|
Revolectrix Co-Pilot II (without IRnet Programmer Unit) Price: S$158.00 |
Revolectrix Co-Pilot II | The Revolectrix CoPilot II is a Infrared thermo-technology flight stabilizer (pitch and roll) for almost any R/C aircraft.
|
Revolectrix Co-Pilot II Price: S$193.80 |
Revolectrix KO/GP Adapter for Cellpro 4S Charger  | Revolectrix Cellpro 4S adaptor for Kokam/GP battery connectors. For use with Revolectrix Cellpro 4S and Multi4 chargers.
|
Revolectrix KO/GP Adapter for Cellpro 4S Charger Price: S$6.80 add to cart | Inquire now |
Revolectrix TP/PQ Adapter for Cellpro 4S Charger  | Revolectrix Cellpro 4S adaptor for Thunderpower/Polyquest battery connectors. For use with Revolectrix Cellpro 4S and Multi4 chargers.
|
Revolectrix TP/PQ Adapter for Cellpro 4S Charger Price: S$6.80 add to cart | Inquire now |
Revolectrix Cellpro Multi4 Charger  | Carrying on the tradition, FMA Direct takes the next step in charging technology with the Revolectrix Cellpro Multi4 Charger. It is designed for use with LiPo, Li-Ion, A123, NiCd, NiMH and Lead Acid battery packs. It features automatic and manual charge rates at up to 4A with overcharge protection and cell balancing (for packs with node connectors).
|
Revolectrix Cellpro Multi4 Charger Price: S$76.00 add to cart | Inquire now |
Revolectrix USB FUIM2 Cable For CellPRO 4S & 10S Revolectrix USB FUIM2 Cable For CellPRO 4S & 10S Price: S$24.00 |
Revolectrix 3S Lipo Battery 2600mAh 25C |
Revolectrix 12" Extension Lead for Cellpro Charger |