SWE SWTR90N Symmetrical Airfoil Carbon Tail Blades | These high performance and lightweight SWE SWTR90N carbon tail rotor blades are designed for use with 50 size helicopters.
|
SWE SWTR90N Symmetrical Airfoil Carbon Tail Blades Price: S$39.20 add to cart | Inquire now |
SWE SWTR107 Symmetrical Airfoil Carbon Tail Blades | These high performance and lightweight SWE SWTR107 carbon tail rotor blades are designed for use with 90 size helicopters.
|
SWE SWTR107 Symmetrical Airfoil Carbon Tail Blades Price: S$39.20 add to cart | Inquire now |
SWE 700DN Helicopter Main Rotor Blades | These SWE glass rotor blades are reinforced with carbon to improve its durability and torsional rigidity.
|
SWE 700DN Helicopter Main Rotor Blades Price: S$92.30 add to cart | Inquire now |
SWE 665S Helicopter Main Rotor Blades | These SWE glass rotor blades are reinforced with carbon to improve its durability and torsional rigidity.
|
SWE 665S Helicopter Main Rotor Blades Price: S$90.00 add to cart | Inquire now |
SWE 570S Helicopter Main Rotor Blades | These SWE glass rotor blades are reinforced with carbon to improve its durability and torsional rigidity.
|
SWE 570S Helicopter Main Rotor Blades Price: S$57.70 add to cart | Inquire now |
Secraft Marker Cable Ties | Mark and manage your cables with ease with these Secraft Marker Cable Markers. No more unsightly and messy wires on your RC models! Comes in a pack of 20 pcs.
|
Secraft Marker Cable Ties Price: S$2.00 add to cart | Inquire now |
Secraft Rubber Bushing with Bracket A Type | Secraft Rubber Bushing with Bracket is easy to use in helping you manage cables on your RC model. You can now route your cables neatly and safely with this neat device.
|
Secraft Rubber Bushing with Bracket A Type Price: S$5.70 add to cart | Inquire now |
Secraft Pull-Pull Nylon Coated Wire | Secraft Pull-Pull Nylon Coated Wire is ideal for use for RC airplanes control surfaces with its light weight and durability. It is 3m long with a 1mm diameter, Comes package with crimps.
|
Secraft Pull-Pull Nylon Coated Wire Price: S$7.10 add to cart | Inquire now |
ESM Electric Retracts for PC-21 | Operate these ESM Electric Retracts for PC-21 with just a flick of a switch on your radio.
|
ESM Electric Retracts for PC-21 Price: S$374.40 |
Secraft Smoke System with Brushless Motor | The Secraft Smoke System is designed for use with RC aircrafts. The custom made built-in 500kv brushless motor together with a 12A ESC allows adjustable flow rate for low viscosity smoke oil.
|
Secraft Smoke System with Brushless Motor Price: S$169.80 add to cart | Inquire now |
Secraft Rubber Bushing with Bracket B Type | Secraft Rubber Bushing with Bracket is easy to use in helping you manage cables on your RC model. You can now route your cables neatly and safely with this neat device.
|
Secraft Rubber Bushing with Bracket B Type Price: S$5.00 add to cart | Inquire now |
TMRF Electric Conversion Kit (S-60 Scale) | This TMRF Electric Conversion Set converts Hirobo S-60 Scale Helicopters (Dauphin, Panther, Eurocopter Tiger, EC-135, EC-120, AH-1W Super Cobra and AH-1S Cobra) to low-noise and hassle-free electric power. Package consist of stainless steel carrier plate for motor and ESC together with a pinion gear extension.
|
TMRF Electric Conversion Kit (S-60 Scale) Price: S$202.14 add to cart | Inquire now |
DJI Flame Wheel F450 ARF Kit | | The DJI Flame Wheel F450 is a multi-rotor designed for all pilots for RC fun or AP. With DJi WooKong-M or Naza autopilot system system (optional), it can achieve hovering, crusing, even rolling and other flight maneuveurs. It is great for aerial photography, FPV or any aero-modelling activities.
|
DJI Flame Wheel F450 ARF Kit Price: S$300.00 |
Quadframe 2-axis Gimbal for GoPro V2 (Lunar Lader Frame) | The Quadframe 2-axis Gimbal for GoPro V2 (Lunar Lader Frame) is now of a completely new design for use with helicopters and multi-rotor platforms. It has a gear ratio of 1:2.1, much less small parts like screws, washers, much more easy to assembly, much better stabilisation.
|
Quadframe 2-axis Gimbal for GoPro V2 (Lunar Lader Frame) Price: S$77.65 add to cart | Inquire now |
FlyCamOne FCOΞ Receiver Pan/Tilt/Release | This FlyCamOne FCOΞ Receiver Pan/Tilt/Release cable allows the modeler to control the FCOΞ camera with his RC transmitter. It remotely controls the functions of pan, tilt and release on the FCOΞ camera installed on the flying model.
|
FlyCamOne FCOΞ Receiver Pan/Tilt/Release Price: S$41.70 add to cart | Inquire now |
FlyCamOne HD Motion Detection Sensor | The FlyCamOne HD Motion Detection Sensor is designed to start recording as soon as people or animals that are within the scope of action of up to 5 metres. It can be installed directly onto rear side of a FlyCamOne HD (720p or 1080p) camera or to the docking station. Package includes an extension cable. |
FlyCamOne HD Motion Detection Sensor Price: S$60.63 add to cart | Inquire now |
Gaui 222256 500X Grommets Pack | Gaui 222256 500X Grommets Pack for use on the 500X-S quad flyer. 10 pcs in a pack.
|
Gaui 222256 500X Grommets Pack Price: S$4.10 add to cart | Inquire now |
DJI GPS/Compass Module for Naza | The DJI GPS/Compass Module is designed for use on the Naza for sensing the position and direction of multi-rotor platforms. Package includes mounting bracket and 3M tapes.
|
DJI GPS/Compass Module for Naza Price: S$238.00 |
CamOne Xplore External Battery Pack | Extend the battery life of the CamOne Xplore Full HD 1080P Video Camera with this External Battery Pack with a capacity of 2600mAh.
|
CamOne Xplore External Battery Pack Price: S$40.10 add to cart | Inquire now |
Singahobby RC Heli Camera Mount Kit S-600 v2 | | Singahobby RC Heli Camera Mount Kit S-600 v2 is a 2-axis mount ideal for use with most 500-600 size RC helicopters. Its landing gears are specially designed for use wide angle shots but will not capture the landing gears.
|
Singahobby RC Heli Camera Mount Kit S-600 v2 Price: S$252.86 add to cart | Inquire now |
Singahobby Helicopter Camera Front Mount S-902 | | The Singahobby Helicopter Camera Front Mount S-902 is highly integrated and stable design for RC helicopters based on our intensive prototyping and test. The width and mounting positions are totally adjustable to fit most 600~700 class RC helicopters. Two sets of springs with different hardness for absorber are provided, they can accommodate any kinds of camera with different weight.
|
Singahobby Helicopter Camera Front Mount S-902 Price: S$864.20 add to cart | Inquire now |
Falten Power 9x5 Wooden CW/CCW Propellers (Pair) | These Falten Power Wooden Propellers are designed for use with multi-rotor flyers for high performance. They are paired to be of the exact same weight and pre-balanced during production. Their surfaces are finished matt for weight reduction. Package includes a clockwise and counter-clockwise rotating propeller each.
|
Falten Power 9x5 Wooden CW/CCW Propellers (Pair) Price: S$20.20 |
STO 2.4GHz 500mW Transmitter & Receiver Wireless System (FPV) | The STO 2.4GHz 500mW Transmitter & Receiver Wireless System is design for FPV (First Person View). It's like putting yourselves as the pilot on your RC model! This amazing wireless video system with a working range of up to 4Km!
|
STO 2.4GHz 500mW Transmitter & Receiver Wireless System (FPV) Price: S$297.70 |
Falten Power 15x10 Wooden CW/CCW Propellers (Pair) | These Falten Power Wooden Propellers are designed for use with multi-rotor flyers for high performance. They are paired to be of the exact same weight and pre-balanced during production. Their surfaces are finished matt for weight reduction. Package includes a clockwise and counter-clockwise rotating propeller each.
|
Falten Power 15x10 Wooden CW/CCW Propellers (Pair) Price: S$33.30 add to cart | Inquire now |